China Carbon Flange Manufacturers Suppliers Factory - Customized Carbon Flange Price

Your Leading Carbon Flange Supplier

Hebei Huayang Steel Pipe Co., Ltd. was established in 2005 with fixed assets of RMB 1.2 billion. In 2024, Hebei Huayang Steel Pipe Co., Ltd. was ranked 69th among the top 100 private enterprises in Hebei Province, China and 57th among the top 100 manufacturing enterprises. Carbon flanges serve as important connectors in industries by joining pipes, valves, and equipment. These flanges are primarily made from carbon steel, which is a cost-effective material with good strength and durability, making it a common choice for linking pipes in industrial systems.

Carbon Steel Slip On Flange
Brand: Huayang
Origin: China
Diameter: 76mm-1442mm
Thickness: 2.5mm-50mm
Material: carbon steel
Standards: national standard, American standard, European standard, British standard, etc.
view more
Carbon Steel Lap Joint Flange
Brand: Huayang
Origin: China
Diameter: 76mm-1442mm
Thickness: 2.5mm-50mm
Material: carbon steel
Standards: national standard, American standard, European standard, British standard, etc.
view more
Carbon Steel Socket Weld Flange
Brand: Huayang
Origin: China
Diameter: 76mm-1442mm
Thickness: 2.5mm-50mm
Material: carbon steel
Standards: national standard, American standard, European standard, British standard, etc.
view more
Carbon Steel Blind Flange
Brand: Huayang
Origin: China
Diameter: 76mm-1442mm
Thickness: 2.5mm-50mm
Material: carbon steel
Standards: national standard, American standard, European standard, British standard, etc.
view more
Carbon Steel Seamless Welded Flange
Brand: Huayang
Origin: China
Diameter: 76mm-1442mm
Thickness: 2.5mm-50mm
Material: carbon steel
Standards: national standard, American standard, European standard, British standard, etc.
view more

Why Choose Us?

Fully Equipped

Huayang currently has 17 new automated steel pipe production lines and an advanced testing center that can conduct various physical and chemical tests on steel pipes.

Customized Solutions

We provide steel pipe processing services and provide customized solutions such as customized pipe sizes, materials and specifications to meet specific customer requirements.

Strong Strength

Hebei Huayang Steel Pipe Co., Ltd. was established in 2005 with a registered capital of RMB 500 million, covers an area of 600,000 square meters, has more than 600 employees, annual sales revenue of nearly RMB 10 billion, and an annual production capacity of 2 million tons.

Production Market

Our products are exported to more than 80 regions including Southeast Asia, the Middle East, South America, Europe and the United States, and "Huayang" brand steel pipes have won a good reputation at home and abroad.

Specifications of Carbon Flange

Specifications	ASTM A105 & ASME SA105, A105N
Size	1/2″ to 48″
Class / Pressure	150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type	Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Types of Carbon Flanges

Sliding flanges (slip-on)

The tube penetrates the cube in the same as in the flange form without touching the place of the touch face to which it is connected through external and internal welding seams. Owing to the low accuracy of the tube duration and better place flexibility, it can be regarded as easier compared to the neck flange. Its mechanical conditions are usually fine for exhaustion and resistance but weaker than the neck flanges.

Blind flanges

Due to various operating pressures, it is designed to cover the ends of tube openings, valves, or tubing. In the terminals where the temperature is a vector or function element or cyclic movements, it is advisable to render the closures by blind flanges and coupling necks.

Threaded flanges

Welding characteristics do not bear for making fast and simple assembly. It is used for specific applications (for instance, in pipelines with atmospheric temperatures and elevated pressures). Using them in ducts where there's a large temperature difference is not feasible.

Mechanical Strength of Carbon Flange

productcate-652-402

Surface Treatment of Carbon Flange

Protective coatings, grease, oil, mill scale and annealing skin are the most common contaminants found on carbon steel. Protective coatings are being used to prevent corrosion after manufacturing, during construction and until the moment of installation. Unfortunately, there is no standardization for the use of conservation methods.

Suppliers of auxiliary pieces such as elbows, flanges, fittings etc. sometimes use 'tough' conservations which can only be removed with environmentally harmful methods. If before installation prefab pipespools are treated by specialized metal surface treatment companies, there are reasonable good facilities and inspection possibilities. A problem arises when such conservations have to be removed from a complete installation in situ.

Physical Composition of Carbon Flange

Density (lb / cu. in.)	0.284
Specific Gravity	7.9
Specific Heat (Btu/lb/Deg F - [32-212 Deg F])	0.107
Melting Point (Deg F)	2740
Thermal Conductivity	360
Mean Coeff Thermal Expansion	6.7
Modulus of Elasticity Tension	30
Modulus of Elasticity Torsion	11

Hardness test of Carbon Flange

Carbon steel hardness rockwell(HR) test, when the sample is too small or the Brinell hardness (HB) is greater than 450, it is measured by rockwell hardness. The test method is to use a diamond cone with a apex angle of 120 degrees or a steel ball with a diameter of 1.5875mm/3.175mm/ 6.35mm/12.7mm, and press it into the surface of the material to be tested under a certain load, and obtain the material from the depth of the indentation. Hardness. The three most commonly used scales are A, B, C, ie HRA, HRB, HRC.
· HRA is a hardness obtained with a 60Kg load and a diamond cone indenter for higher hardness materials. For example: steel sheet, hard alloy.
· HRB is a hardness obtained by using a 100Kg load and a 1.5875mm hardened steel ball for a material with a lower hardness. For example: mild steel, non-ferrous metals, annealed steel, etc.
· HRC is a hardness obtained with a 150Kg load and a diamond cone indenter for higher hardness materials. For example: hardened steel, cast iron, etc.

Usage of Carbon Flange

Oil and Gas Industry:

These flanges are common in oil refineries, pipelines, and petrochemical plants.

Chemical Industry:

They are used in chemical processing plants due to their resistance to corrosion.

Water Treatment and Distribution:

Vital for secure connections and preventing leaks in water treatment plants.

Power Generation:

Carbon steel flanges are employed in power plants, including nuclear, thermal, and hydroelectric facilities, due to their durability.

Payment Terms

T.T with 30% downpayment, 70%before shipment.
Paypal or West Union also accept.

Certificate

FAQ

Q: What is surface treatment of carbon flange?

A: Protective coatings, grease, oil, mill scale and annealing skin are the most common contaminants found on carbon steel. Protective coatings are being used to prevent corrosion after manufacturing, during construction and until the moment of installation.

Q: What material is used for carbon flanges?

A: The carbon flanges have carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium depending on the material grade. The carbon steel pipe flange price list varies according to the material grade as well.

Q: What is the hardness test for low carbon flange?

A: The Brinell hardness test method consists of indenting the test material with a 10 mm diameter hardened steel or carbide ball subjected to a load of 3000 kg. For softer materials the load can be reduced to 1500 kg or 500 kg to avoid excessive indentation.

Q: What is the ASME standard for carbon flange?

A: ASME SA 524 Carbon Steel Seamless Pipes are Low Carbon Steel Pipes with max 0.21 % carbon content with combination of 0.90 – 1.35 % manganese. These Pipes are also known as mild steel pipes and tubes. ASME SA 524 Pipes are low-cost Pipes easy to form and shape.

Q: What are the functions of carbon flange?

A: Forged flanges are less carbon-free compared to molten flanges. The reason is that they do not oxidize quickly. They are flat, the construction is lightweight, and the molten flange comes with superior mechanical properties. Improper methods of forging may often result in irregular and broad grains. It is required to harden the forging and cracking than the casting flange.

Q: How is the hardness of carbon flange?

A: With more carbon content, the carbon steel flanges achieve toughness and strength but are less tough and ductile to weld. Higher carbon content may decrease the flange's melting point and its total temperature tolerance.

Q: What are the unique characteristics of carbon flange?

A: Each type of flange has its own unique characteristics and is used in different applications. Slip-on flanges, for example, are easy to install and are commonly used in low-pressure systems. Weld neck flanges, on the other hand, have a tapered hub and are used in high-pressure and high-temperature systems.

Q: What are the grades of carbon flange?

A: The most commonly used grade of carbon steel for flanges is ASTM A105. This is a standard grade for moderate to high-temperature services. Other grades, such as ASTM A350, are also used for low-temperature services. Additionally, high-yield strength grades such as ASTM A694 F52 and ASTM A694 F60, are used for high-pressure systems.

Hebei Huayang Steel Pipe Co., Ltd is one of the most professional carbon flange manufacturers and suppliers in China, providing high quality customized products with low price. We warmly welcome you to wholesale cheap carbon flange from our factory.

Carbon Steel Socket Weld Flange, Carbon Steel Blind Flange, Carbon Steel Slip On Flange